GLDMA is a professional company in the production and Research&Development of metal bending machine, cutting machines, Hydraulic press machine, mechanical press machine, rolling machine, ETC. Relying on the integrity management, strong credit, and strict quality control, our company has grown and developed into a famous and powerful company in very short time. Company product range covers more than 20 series, over 200 types of small, medium, and big sizes of press brake, CNC shearing machine, CNC hydro-servo bending machine, mechanical press machine, Ironworker machine, hydraulic press machine, rolling machine including models of QC11Y, QC12Y, \WC67Y, WC67K, W11, W11S, W12, J21, J23, Q35Y, etc. All those machines are widely used in manufacturing automobile, telecom tower, light pole, utensils, computer, ETC. Company development strategy in the field of metal sheet processing industry, always following the market trend to meet the demand of clients, Always pay attention on the long term cooperation with client, Always keep the advantages of core competition in technology, service and management, Always respect our contract and keep our promise. To all clients: Your strict requirements of quality is the driving force of our effort. May our products and service bring you the joys of success. If you need a reliable laser cutting machine manufacturer, then you are at the right place, next I will introduce the powerful laser cutting machine manufacturer in China, GLDMA Group.
Fiber laser cutting machine have been common in sheet metal processing. Due to their high work efficiency and high quality of finished products, they have become the standard for sheet metal processing stations. However, some customers use the laser cutting machine to cut out the workpiece burrs, many people think that the quality of the laser cutting machine products, in fact, not quite. Now explain the reasons and solutions for the occurrence of laser cutting machine burrs!
Some reasons for burrs in cutting:
- The purity of the auxiliary gas of the laser cutting machine can not reach the required standard, and the workpiece will also produce burrs.
- The cutting speed of the laser cutting machine is too slow, which destroys the surface quality of the cutting surface and produces burrs.
- The output power of the laser cutting machine is not enough, and the metal is not effectively vaporized, thereby generating excessive slag and burrs.
- The laser cutting machine works for too long, so that the equipment has an unstable working state, which will also lead to the occurrence of burrs.
- The laser cutting machine produces a deviation of the upper and lower positions of the focus of the laser beam, so that the energy does not just converge on the workpiece, the workpiece is not fully vaporized, so that the amount of slag is increased, and it is not easy to blow off, so that burrs are more likely to occur.
Some ways to solve the glitch:
- Replace the auxiliary gas with higher purity.
- Adjust and increase the cutting line speed in time to reach the normal value.
- Adjust the position of the focus of the laser beam and adjust it to the optimal state according to the offset position generated by it.
- Turn off the laser cutting machine and re-start it after a while to get enough rest.
- Check whether the laser cutting machine works normally. If it is not normal, it needs to be repaired and maintained in time; if it is normal, check whether the output value is correct.
In fact, burrs are excessive residue particles on the surface of metal materials. When the laser cutting machine is processing the workpiece, the energy generated by the laser beam illuminating the surface of the workpiece vaporizes the surface of the workpiece and evaporates to achieve the purpose of cutting. If a material has a burr, then the material can be characterized as a defective product. The more burrs, the lower the quality naturally. Therefore, we must pay more attention to the future processing process.
Our factory video: https://www.youtube.com/watch?v=_jK9cA6tLj0