High Standard CNC Press Brake 6-8Axis

GLDMA High Standard CNC Press Brake 6-8Axis

GLDMA High Standard Series cnc press brake, it’s an affordable CNC bending machine, an impressive number of features and options. Competitive pricing with advanced DELEM DA66T or DA69T 3D capable graphical controls, High Standard Series is your first choice in Y1/Y2 machine technology.

Standard Equipment

DELEM DA66T Controller
Electrics : Germany Schneider Electric
Main Motor:Siemens Motor-Germany
Servo motor：ESTUN
Foot Switch:KACON-South Korea
Hydraulic System:Bosch Rexroth-Germany

Oil Pump :Sunny-USA
Sealing Ring :PARKER-America
High efficiency motor – class IE3
Tube Connector :EMB-Germany
Backgauge:Hiwin-Taiwan
Grating ruler：Fagor

Stress Analysis & Finite Element Analysis

The CAE software SOLIDWORKS used as the method to analyze the linear static construction, stress and deformation for press break and laser cutting machine frames. So for complicated structures, highly complex loading’s, transient modelling and combination of the above, FEA makes sense.

2D graphical touch screen programming mode
17" high resolution colour TFT
3D graphics acceleration
Colour LCD display
1280 x 1024 pixels, 16 bit colour
Full touch screen control (IR-touch)
Sensor bending & correction interface Profile-TL offline software
Full Windows application suite

3D and 2D graphical touch screen programming mode
3D visualisation in simulation and production
17" high resolution colour TFT
1280 x 1024 pixels, 32 bit colour
3D graphics acceleration
Full touch screen control (IR-touch)
Sensor bending & correction interface
Profile-T3D offline software

GLDMA CNC press brake use all Raw material is provided by qualified suppliers and chemical composition corresponds to international standards. Therefore, raw material yield and tensile strength are guaranteed, are standardized with a 8.4 x 3.5 mm safety groove, which keeps the tool from falling out.

Ball screws and linear guide on X, R-axis.
Mechanical accuracy ± 0.03 mm.
Mechanical accuracy ± 0.03 mm.
Axes Z1‐Z2 speed 1000 mm/s.
Axis X1-X2 speed 500 mm/s.
Axis R1-R2 speed 500 mm/s.
Load capacity – 300 kg per support.

The German Rexroth fully closed-loop electro-hydraulic servo high-frequency synchronous control system is adopted to ensure that the machine tool has high stability and high precision in the process of high-speed operation.

Advantage:

The frequency response (response frequency) is higher and can be as high as 200HZ.
It can continuously and proportionally control the pressure and flow of the hydraulic system, control the position, speed, and force, and reduce the impact of pressure changes.
Closed-loop control, signal feedback
Original German imported products, longer service life.

Very precise bending angles
Europe type dies with 60 mm and 90 mm
Base can be clamped as well as single dies with 13 mm tang
electric crowning with a controller
Precise positioning and alignment of the crowning table
Easy and fast usage

DSP® laser protection will be necessary if you have a high requirement for the safety.

Advantage:

Laser protection, Multi beam Receiver
Pretective areas, Front, center and rear.
The safety level is CAT.4 and SIL3
Detection Case protection degree: IP 65
Laser classification: class 1 M
Response time: 5 ms
Change Speed Point : 5mm + Stopping Space
The maximum protective distance is up to 15M
LED indicators show various states

GLDMA® promotes a friendly environmental policy, and as such all our equipment features the Hybrid ECO Function. Our hybrid servo-drive positioning system provides accuracy at any position.

High dynamic for a higher productivity of the machine.
Compliance with EU Directives.
Lower energy for a green Machine.
Lowered sound pressure level at 50 dB.
The servo-motor, with closed loop speed control.
Energy efficiency of up to 35 % compared to conventional systems.
Operating cost is min due to low energy consumption. Thus, it gives advantages to the user with high efficiency & low operation cost.

DELEM DA-Offline software maximises machine efficiency and production output of press brakes. The Profile-T3D software facilitates offline programming and simulation the bending process.

The Bending offline software is an indispensable tool to increase the profitability of any CNC press brake machine. The offline software Profile T3D enables in a quick, easy and efficient way, importing and unfolding 3D files, finding automatically solutions for tooling and bend sequences and simulating dynamically in 3D for checking collisions.

The iMeasure Laser angle measurement system with Data-M Engineering for an accurate bend angle after only one bending operation. The iMeasure are fully-automatic laser-assisted bend angle measurement systems for CNC press brakes. Irrespective of the properties or thickness of the material, the LaserCheck enables an exact determination of the bending angle with an accuracy of better than 0.1°. This represents precision which has never been available before.

A laser beam is projected on the sheet metal surface
The camera detects the laser beam
The angle between the beam and the camera axis determines the bend angle.
Force reduction + calculation of the springback
Automatic angle correction

Automatic bending follower supports
AP1 - AP2 CNC-controlled interpolated axes
ecommended for heavy parts or large thin plate
Bend as closed as 70°
Load capacity – 180 kg per support
Brush and support shaft dim 350x900 up to 1200 mm

Press brake punches and dies will be one of the most important topics we discuss before you place the order. Any bending shape will be completed by a suitable set of punch and die. We can provide appropriate toolings according to different bending requirements of customers.