Advanced CNC Press Brake 3-4Axis

GLDMA Advanced CNC Press Brake 3-4Axis

GLDMA Advanced Series press brake, it’s an affordable CNC bending machine, an impressive number of features and options. Competitive pricing with advanced DELEM DA53T or DA58T 2D capable graphical controls. Advanced Series is your first choice in Y1/Y2 machine technology.

Standard Equipment

DELEM DA53T Controller
Electrics : Germany Schneider Electric
Main Motor:Siemens Motor-Germany
Servo motor：ESTUN
Foot Switch:KACON-South Korea
Hydraulic System:Bosch Rexroth-Germany

Oil Pump :Sunny-USA
Sealing Ring :PARKER-America
High efficiency motor – class IE3
Tube Connector :EMB-Germany
Backgauge:Hiwin-Taiwan
Grating ruler：Fagor

Stress Analysis & Finite Element Analysis

The CAE software SOLIDWORKS used as the method to analyze the linear static construction, stress and deformation for press break and laser cutting machine frames. So for complicated structures, highly complex loading’s, transient modelling and combination of the above, FEA makes sense.

"Hot-key” touch navigation
10.1" high resolution colour TFT
Up to 4 axes (Y1,Y2 + 2 aux. axes)
Tool / material / product library
Servo and frequency inverter control
Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
TandemLink (option)
USB memory stick interfacing
Profile-T offline software

2D graphical touch screen programming
15" high resolution colour TFT
Bend sequence calculation
Crowning control
Servo and frequency inverter control
Advanced Y-axis control algorithms for closed-loop as well as open-loop valves.
USB, peripheral interfacing
Profile-T offline software

GLDMA CNC press brake use all Raw material is provided by qualified suppliers and chemical composition corresponds to international standards. Therefore, raw material yield and tensile strength are guaranteed, are standardized with a 8.4 x 3.5 mm safety groove, which keeps the tool from falling out.

Hiwin Ball screws and linear guide on X, R-axis
Axis X speed 500 mm/s.
Manual Z1, Z2-axis with HIWIN linear guide
Mechanical accuracy ± 0.01 mm.
Fingers with double stop and micrometric adjustment.

The German Rexroth fully closed-loop electro-hydraulic servo high-frequency synchronous control system is adopted to ensure that the machine tool has high stability and high precision in the process of high-speed operation.

Advantage:

The frequency response (response frequency) is higher and can be as high as 200HZ.
It can continuously and proportionally control the pressure and flow of the hydraulic system, control the position, speed, and force, and reduce the impact of pressure changes.
Closed-loop control, signal feedback
Original German imported products, longer service life.

Very precise bending angles
Europe type dies with 60 mm and 90 mm
Base can be clamped as well as single dies with 13 mm tang
electric crowning with a controller
Precise positioning and alignment of the crowning table
Easy and fast usage

DSP® laser protection will be necessary if you have a high requirement for the safety.

Advantage:

Laser protection, Multi beam Receiver
Pretective areas, Front, center and rear.
The safety level is CAT.4 and SIL3
Detection Case protection degree: IP 65
Laser classification: class 1 M
Response time: 5 ms
Change Speed Point : 5mm + Stopping Space
The maximum protective distance is up to 15M
LED indicators show various states

GLDMA® promotes a friendly environmental policy, and as such all our equipment features the Hybrid ECO Function. Our hybrid servo-drive positioning system provides accuracy at any position.

High dynamic for a higher productivity of the machine.
Compliance with EU Directives.
Lower energy for a green Machine.
Lowered sound pressure level at 50 dB.
The servo-motor, with closed loop speed control.
Energy efficiency of up to 35 % compared to conventional systems.
Operating cost is min due to low energy consumption. Thus, it gives advantages to the user with high efficiency & low operation cost.

Press brake punches and dies will be one of the most important topics we discuss before you place the order. Any bending shape will be completed by a suitable set of punch and die. We can provide appropriate toolings according to different bending requirements of customers.